Products

+
  • 1.TDC1-2主图800X800.jpg
  • 1.TDC1-M主图.jpg
  • 除尘器3.15-18.jpg

TDC1/2-M Series

Mobile Dust Collector


TDC1-M Series mobile dust collector adopts the submerged flow filter structure of horizontal installation cartridge, which improves the filtration efficiency and makes the replacement and maintenance of the cartridge more convenient and clean.Reasonable design, small volume with casters, operators can easily move.

  • Description
  • Specifications
  • Video
    • Commodity name: Mobile Dust Collector
    • Commodity ID: TDC1/2-M Series

    TDC1-M Series mobile dust collector adopts the submerged flow filter structure of horizontal installation cartridge, which improves the filtration efficiency and makes the replacement and maintenance of the cartridge more convenient and clean.Reasonable design, small volume with casters, operators can easily move.

    INTRODUCTION

    TDC1-M Series mobile dust collector adopts the submerged flow filter structure of horizontal installation cartridge, which improves the filtration efficiency and makes the replacement and maintenance of the cartridge more convenient and clean.Reasonable design, small volume with casters, operators can easily move.
     
    The standard distribution of dust collector is nano fiber flame retardant cartridge, can also provide antistatic, PTFE coated and other materials of the cartridge.According to different dust, the filter can be used for welding, grinding, food, medicine, electronics, new energy and other occasions of different dust.High-precision filtration materials can meet the discharge requirements of different occasions. 


    A Φ200mm flange interface is reserved at the top of the dust collector, which can be connected to the flexible suction arm or hard metal pipe according to the use requirements.
    The dust collector is equipped with a compressed air cleaning system.The differential pressure gauge on the operating panel provides an indication of the operating status of the cartridge. The operator can determine whether to perform compressed air pulse cleaning or replace the cartridge with a new one according to the area where the differential pressure gauge pointer is located.Deashing adopts off-line deashing method, manually press the button to spray compressed air, and the dust blown from the surface of the filter cartridge will enter the dust 
    collecting drawer below the dust collector. 


    The specially configured brushless fan with large air volume provides stronger suction with lower power consumption and greatly reduces equipment noise.This product has much higher negative pressure parameters than similar equipment, so in addition to the conventional application in welding smoke, but also can be used in a short distance small caliber hose to local dust collection treatment, such as laser opening, marking, tin welding and other applications.

    APPLICABLE FIELDS

     

     

               

     

    PRECISION

    MANUFACTURING

    NEW ENERGY NEW MATERIAL

    FOOD &

    PHARMACEUTICAL

    ELECTRONICS  
    WORKING PRINCIPLE
     

    ■ The fume is collected by the suction arm or pipeline and enters the filter chamber under the power of the fan. Through a horizontal cartridge,particles in the soot are intercepted and filtered on the surface of the nanofiber filter material,clean air penetrates the filter material into the center of the cartridge,through the clean air chamber and blower directly in the indoor discharge.

     

    ■ With the accumulation of dust on the surface of the filter material, the pressure difference of the filter material will gradually increase, which is directly reflected in the pressure difference meter of the equipment. According to the instructions of the pressure difference meter, manual button pulse dust cleaning can be carried out to make the dust on the surface of the filter cylinder fall off to the dust collecting drawer

     

     

     

    APPLICATION PROCESS
     
     
     
  • TECHNICAL DATA
    Model TDC1-M TDC1-MS TDC2-M TDC2-MS
    Housing construction Plastic sprayed carbon steel SUS304 Plastic sprayed carbon steel SUS304
    Related voltage 220V,1P/N/PE 380V,3P/N/PE
    Related frequency 50Hz
    Input Power(KW) 0.9 2.2
    Max airflow(m³/h) 1200 2200
    Max perssure(L) 4000 2000
    Capacity(L) 12
    Cartridge quantity(pcs) 1 2
    Filtration area (㎡) 15 30
    Filter efficiency 99%
    dust cleaning Manual pulse cleaning Compressed air automatic cleaning
    Compressed air required 4-5bar clean and dry compressed airr
    Suction port(mm) 200 2x200
    Sound level(dB) 65 75
    Remark: Suction arm is not standard.For additional purchase, please refer to the attachment and consumables.

     

     

For further information, please call the contact number400-811-8878Thank you for your support!

For further information, please call the contact number400-811-8878Thank you for your support!